Many of us aren't still familiar with most of the connectors we see behind our computers. This article explains different types of connectors and where they're used. If you were ever confused well it is time to say goodbye to all confusions.
.
(Don’t forget to subscribe via RSS feeds or E-mail, you can clear your doubts in the comment section below.)
.
1. D-sub: (D-subminiature):
A very common display connector for monitors/display panels. Usually found in CRT monitors, this connector will soon be phased out on future LCD monitors with DVI, HDMI or DisplayPort connectors.
.
2. DVI (Digital Visual Interface):
DVI is the digital display output port currently used for most LCD monitors. It is superior to the D-Sub VGA standard.
.
3. HDMI: (High-Definition Multimedia Interface):
A single media output interface which incorporates high quality audio/video output in one single cable for high-definition TVs and monitors. The current standard is 1.3 though it keeps evolving. HDMI also supports HD antipiracy measures.
.
4. DisplayPort:
A digital display interface similar to HDMI, but with a higher data transfer rate. Yet to be implemented in desktop monitors, this port has already made its entry on some graphics cards. The connector is much smaller and more convenient than DVI.
.
5. Component Video:
Comprises of three analog video signals: Y. Pb and Pr. Usually used where high quality video is required with resolutions of up to 1080p. It does not carry audio on the same cable. This type of interface is found on DVD players and TV sets, while most graphics cards need an adaptor.
.
6. Composite Video:
It is an analog video output with three signals Y, U, and V combined together with sync pulses. It supports standard video resolutions of up to 480i and does not carry audio on the same cable. Found on most VCD/VCRs, DVD players, TVs, camcorders and certain graphics cards. This is easily the lowest quality video interface.
.
7. S-Video:
Also known as Super-Video, is similar to composite video output, but with two seperate video signal lines for Luminance and Chroma. It supports video resolutions of up to 576i and does not carry audio on the same cable. This type of interface is seen in digtal camcorders, DVD players, and certain graphics cards.
.
8. RJll and RJ45 (Registered Jack-11 and 45):
These are connectors for communications-related and networking purposes. RJll is used for telephone connections, while RJ45 is used in twisted pair Ethernet connections. The RJll connector is smaller than the RJ45 connector. The two have 6 and 8 pins respectively.
.
9. Coaxial S/PDIF (Sony/Philips Digital Interconnect Format):
It Is an interface to carry compressed digital audio data (multi-channel support) over a single wire using a standard RCA jack. Similar to optical S/PDIF, which carries signals using light as a medium via an optical fiber cable.
.
10. Audio in-out:
This is the most common audio input and output port type. It usually is a 3.5mm earphone-type plug and socket, and carries stereo audio signals for the left and right speaker channels. Multiple audio ports can be used to carry multi-channel audio output. The audio ports on a motherboard are color-coded according to their targets.
.
11. PS/2 (IBM Personal System/2):
It is generally an input port used for keyboards and mice. The purple PS/2 connector is for the keyboard, while the mouse connects to the green PS/2 port. It is 1 on motherboards only, but is already being phased out because of the growing adoption of USB peripherals.
.
12. FireWire (IEEE 1394):
FireWire is used for high-speed data transfers. It is found in two variants—FireWire 400 and FireWire 800 The data transfer speeds attained by FireWire 400 and FireWire 800 connections are 400 Mb/s and 3200 Mb/s respectively. Both are usually used for importing video from camcorders or hard drives, but are losing out to high-speed USB 2.0.
.
13. Parallel:
Also known as printer port or Centronics port, this is an IEEE standard I/O connector. Older printers use this type of connection where the data is sent to the printer in a parallel form. This connector is now almost completely replaced by the common and fast USB port.
.
14. Serial/RS232 (Recommended Standard 232):
It is a standard I/O port for serial binary data signal transfers. Usually found on older computers (but supported on most new ones via a riser), it was commonly used to connect modems, and mice, and was popular as a way of interfacing with programmable electronics projects.
.
15. USB (Universal Serial Bus):
It is a serial bus standard used to connect devices to a host computer. Used commonly by peripherals such as keyboards, mice, printers, scanners, modems, storage devices and so on, the highest data transfer speeds by USB are up to 60 MB/s. This is today the most common and easy-to-use interface for peripherals.
.
16. Mini USB:
This is functionally no different from a regular USB connector, but is a lot smaller in size. Mini USB connectors are commonly used for smaller devices such as portable storage devices, MP3 players, cameras, etc.
.
17. SATA (Serial Advanced Technology Attachment):
It is used for hard drives and optical drives inside the computer like PATA used to be, but is a lot faster than the older PATA. The SATA interface can transfer data at speeds of up to 3 Gb/s. SATA ports are found on motherboards and add-on drive controllers.
.
18. eSATA (External Serial Advanced Technology Attachment):
It is similar to SATA, but is used externally unlike the former which is used internally. eSATA is used to connect an external hard drive directly to the computer's motherboard for incredibly fast data transfers.
.
19. Micro USB:
Micro USB is just like mini USB (functionality wise) but smaller than the mini USB and is used for much smaller devices and gadgets such as MP3 players, mobile phones/PDAs which have no space even for mini USB.
No comments:
Post a Comment